Adarsh International

The Heavy-duty tablet compression machine is a high-speed mechanical device. It compasses the ingredients into the required tablets shapes like Round Square Rectangular, Oval, Hexagonal, Capsule Shape or any other Shapes. Tablet Making Machines are useful for Pharmaceutical Industries, Chemical Industries, Food Industries, Feed stuff Industries etc. Features: • Pressure on the tablets is controlled by adjusting a lever • Powder filled in cavity is managed automatically by a moving feeder • Provided with motor, hopper, feeder and tablets slider • Supplied without dies/punches.

• Actophotometer Activity Cage Digital Counter to Indicate Horizontal.

• A versatile instrument having 6 photo-cells and digital counter to indicate horizontal activity.

• It provides electric shocks of up to 100V, 0.2mA AC, indicated on a voltmeter for activating the animal.

• It consist of six built in photo sensor and 4 digit digital counter to indicate the loco meter activity.it measures then spontanecous  and indicated activity with digital totalize.

This programmable advanced instrument is equipped with microprocessor-based circuitry, to program the friability test. • The unit is equipped with informative two lines LCD display screen. • It is also equipped with digital readout, automatic pre-set count stop, and audio signal. • It is supplied with two acrylic drums. • The apparatus will have 10-degree tilt facility, as required.

Additional heavy duty for making tinctures.

Decoctions infusion etc. cap

Disc made up of pure stainless steel.

Drive for fixing screws.

Mesh made from stainless steel in the form of an inner drilled container with stop cock.

Extra heavy duty for making tinctures cap. 1 Lt, stainless steel disc, with screw drive, stainless steel mesh as inner perforated vessel with stop cock.

• Switches: Processor based switches for blower, LED light & UV light With LCD back light display. (UV light with Timer)
• Pre-filter: 99.00% down to 5 micron.
• HEPA Filter: ISO 14644 Class 5 (Class100) 99.97%-99.99% down to 0.3 micron. Mesh guard for protection of HEPA filter.
• Airflow : Frontward Horizontally
• Work Table : Made up of stainless steel 304gr. Cock for gas on work table.
• Side Panels : 6mm+-.5mm thick acrylic sheet.
• Front door : Made of acrylic.
• UV Lamp : 15/30W, make Philips Holland,
• Illumination : LED White Light.
• Pressure : Digital Manometer 0-50mm range with filter failure alarm.

• Working Area Size 60x60x60cm.
• Working Area Size 90x60x60cm.
• Working Area Size 120x60x60cm.
• Working Area Size 180x60x60cm.

Single punch automatic compression and injection device with each revolution of the wheel drive automatic feed and remove of tablets. Built on heavy cast body with centric pressure system steeliness steel hoper provided and connected by a robber tube easy setting for thickness and hardness of tablets with nuts and locknuts. Set of two spanners provided necessary tool die Heavy duty electric model is also available.

Switches     :          Microprocessor base switches for blower, LED light with LED      back light display. (UV light with timer.

   Pre -Filter    :         99.00% down to 5micron.

   HEPA Filter  :         ISO 14644 Class 5 (Class 100) 99.97%-

      99.99% down to 0.3 micron. Mesh guard for protection of                            HEPA filter.

   Airflow          :        Vertical,70% of the air volume is Re-circulated, 30%                                                 Exhausted.

   Noise Level  :        60 decibel  5%.

   Velocity        :        0.35-0.50m/sec.

   Work Table   :        Made up of Perforated Stainless Steel 304gr. Cock for gas                                       on work table.

    Front door   :        Made of acrylic.

    UV Lamp      :       15/30W, make Philips Holland.

    Illumination :        LED Light for easy operation.

    Pressure      :        Digital Manometer 0-50mm range with filter failure alarm.

    Power Supply:      230V  10V/50Hz single phase A.C.

      Cabinet made of Mild Steel duly powder coated small shelf           provided on the back.

   Heavy Duty Blower:   Dynamically balanced with 0.25H

           Electric motor mounted on anti   vibration pad 1440rpm                motor.

 Working Area Size: 60x60x60cm

 Working Area Size: 90x60x60cm

A handy, tough and direct dial reading type tablet hardness tester, working as pair of plairs, generates breaking force in single grip. The instrument offers accurate and reproducible results much faster other conventional hardness testers.

Detachable polishing pan for use with coating pan. Made of mild steel, painted & provided with inner lining of superior canvas cloth. Inner diameter 12" x 8" high with opening of 7" dia neck.

• We offer 300 holes manual capsule filling machine in complete stainless steel material.
• In this manual capsule filling machine model, the empty capsules are to be loaded manually in the filling tray and all other processes are also to be done manually.
• There are different capsule size ranging from 00, 0, 1, 2, 3, 4, 5 for which this machine is suitable.
• Capsule Size 00, 0, 1, 2 can be done on the same machine with the help of change parts.
• Capsule size 3 and 4 can be done on the same machine with the help of change parts.
• For capsule size 5, a separate machine is prepared.
• The machine is provided with highly finished stainless steel surface and also all parts of the machine are stainless steel constructed.
• We provide the premium quality mirror finish and very precise locking of the capsules in our manual capsule filling machine.
• Our manual capsule filling machines are worldwide accepted with ample of clients operating the machines worldwide.
• The machine is designed and constructed by qualified engineers with good quality material and products which give best quality output and least breakdowns.

• 1 no top section plate provided.
• 3 no's. capsule loading tray provided.
• 1 no. powder filling tray provided
• 1 no. Nylon Brush provided.
• 1 no. Teflon Scrapper provided.
• The Machine is rested on 4 no's legs.

• Timer: Microprocessor based preset timer 00:01 to 99:59 Hrs with alarm.
• Bath: Made up of 10mm thick clear acrylic 300mm W X 200mm D X 200mm H
• Heater: 350 watt stainless steel.
• Temperature Controller: Digital Microprocessor Based.