Bio Technology

Product Details:

BOD Incubator is designed for low temperature incubation and determination of Bio Chemical Oxygen Demand (B.O.D). The BOD Incubator comes with a double wall construction. The Inner chamber is made of richly anodized aluminum or highly polished stainless steel with with two / three removable perforated shelves. The exterior chamber of the BOD Incubator is made of thick mild steel sheet duly finished in enamel paint. Outer double wall door is provided with magnetic gasket and lock & key arrangement. The inner door is made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temperature insulation. The cabinet is mounted on castors. The temperature in the BOD Incubator is controlled by a sensitive thermostat from 5oC to 50oC ± 1oC. For lower temperature working, a standard cooling unit with sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has made within the chamber for higher temperature. Inner air circulating system is provided to achieve uniform temperature in the whole chamber. A control panel is provided with various indicators such as on off switch, L - shaped thermometer, etc. The BOD Incubator is supplied with cord & plug, etc.

SS Chamber Sizes:

• 24" x 18" x 6" - 4 cubic ft.
• 33" x 20" x 16.5" - 6 cubic ft.
• 34.5" x 22.5" x 22.5" -10 cubic ft.
• 36" x 26" x 23" - 12 cubic ft.
• 27.5" x 25.5" x 35.5" -15 cubic ft.

Optional Accessories:

• Timer 0.24 hours day night cycle.
• Co2/air mixer nozzle is provided.
• Internal illumination with 3 fluorescent tubes.
• Digital temp. Indicator-cum-Controller.
• Micropcessor PID digital temp. Indicator-cum-controller.

Product Details:

The lid of the jar is made of Aluminum pressure die Casting fitted with Pressure Valve, Vacuum Valve, Safety Valve & compound Pressure cum vacuum gauge, three finger aluminum clamp and sealing "O" ring. This is recommended only where inside air of jar is removed thru vacuum pump and CO2 is filled in the jar thru CO2 gas cylinder to generate anaerobic condition in the jar. Also supplied with plain aluminum pressure die casted lid which can be fitted when readymade gas packs are used to generate the anaerobic conditions inside the jar. When readymade gas packs are used, there is no need of lid fitted with dial gauge etc., for extra life of equipment.

Product Details:

We supply Stainless Steel Fume Hood with sunmica and expoxy Painted from inside, granite working Platform, PP sink, water Tap & exhuast system.

Product Details:

The basic set-up of the colorimeter is: LED light source: Produces polychromatic light over the entire visible region broad spectrum filter the color wheel has nine different filters. The filter employed is selected by wavelength. Each filter will produce monochromatic light at a specified peak. Cuvette Holder: It holds the inserted cuvette during testing. It is imperative the cuvette be consistently oriented in the holder. Round cells usually have orientation markings to correctly position the cuvette. Detector: A silicon photo diode is used as the detector. The photo detector current will change as a function of light energy. Display: The current signal from the detector is converted to a numerical value, absorbance and is shown on led display.

Product Details:

We supply Flask Shaker (Wrist Action) Carries Flask (Veriable Speed).

Product Details:

Product Details:

• Counting plate with illuminated standard wolf hugel ruling ensures clearly differentiated and sharply defined colonies.
• Each touch of making pencil in the Petri dish increment the colony count by '1' and the glowing LED Display depicts the total colony count.
• Provided with a manual reset of digital display, ON/OFF Switch, counting plate, cord and plug.

Product Details:

Features:

• Analog Fixed 
• It is recommended for mini Horizontal 
• Mini vertical Electrophoresis Apparatus.

Product Details:

^Features:

• Extremely durable
• ^{Sturdy body}
• ^{Excellent performance}
• ^{High quality}

Product Details:

Product Details:

• Double walled construction outer body made of either mild steel powder coated or stainless steel 304 grade & inner body made of S.S.304
• Glass wool insulation between two walls
• Nichrome U-shape heater for long life & fast heating.
• With concertic ring to hold flask for 6/12 hole choice

Product Details:

Magnetic Stirrer with Hot Plate . Electronically controlled, motorized magnetic stirrer with corrosion and chemical resistant stainless steel top. Designed for easy use and maintenance. Fitted with speed control switch. Supplied with rotar. With hot plate. Energy regulator adjust the heating of hot plate. Operates on 220-240V, 50/60Hz

Product Details:

Features:

• The mounting block is illuminated from below by a lamp fixed in its housing.
• The aluminum block accepts three capillary tubes and mercury thermometer.
• The temp is regulated by energy regulator fitted to the unit.
• Supplied without capillary tubes and thermometer

Product Details:

^{Horizontal Mini Electrophoresis that is commonly used for carrying out number of analytical tests by separating DNA and RNA on the basis of shape, size, and electrical affinity. It is offered with platinum electrodes that are almost hundred percent pure. We also provide gel casting tray, one comb with a terminal lead.}

Features:

• ^{Easy maintenance}
• ^{Precision-designed}
• ^{Flawless functioning}

Product Details:

Product Details:

• Gel Electrophoresis System Vertical Mini with glass plates, combs. Leak proof.
• Moulded in single piece made of polycarbonate. 99.9% pure platinum wire is used in electrode.

Product Details:

Product Details:

• Pen Type Aquasol (Rakiro)
• Fast, reliable and accurate measurement.Compact single chamber design Built-intemperature.
• SensorAuto shut off function to enhance battery lifeHold function for ease of read & recordEasy CalibrationAvailable in a Portable Pouch.

Product Details:

We supply Laboratory Hot Plates with 3 Stages Heat Control Switch with Energy Regulator.

Product Details:

We Supply an excellent range of Spectrophotometer like, VIS, UV-VIS, IR in single beam & double beam with built in software that permits the instrument to be linked to a computer and a printer to display the photometric and spectral data on the PC monitor. UV-VIS Spectrophotometer basically refers to absorption spectroscopy or reflectance spectroscopy in the ultraviolet-visible spectral region. Our offered products are designed to give fast, precise and accurate colour measurement information on materials ranging from paper and paint to plastics and textiles. Offered products are checked as per industry set parameters to ensure the entire range is free from any sort of production defect.

Product Details:

• Heating Mantle 100-5000ML in 60-600Watt 
• Suitable for laboratories, chemicals, pharmaceuticals, Dyes, Glass plants etc. Particularly useful for Heating inflammable liquids. Electric heating net is hand knitted from glass Yarn and there is no joint to maintain the strength of the yarn and stands high temperature up to 350 degree c. the body of the mantle is spun one piece from non-rusting Aluminum (up to 1.0 liters Capacity) duly stoving painted. All heating mantles are lagged with special grade mineral wool

Product Details:

Karl Fischer Titrimeter is an automatic apparatus designed to carry out Karl Fischer Titrations for accurate determination of moisture content in various samples. The instrument comprises of two units i.e contol unit & titration unit. The control unit controls the complete automatic titration. On pressing the START button, the titration starts and the KF reagent is added automatically from the burette, through a solenoid valve into the titration vessel. As soon as the end point is reached, the titration is stopped automatically by the Control Unit. It has fully solid state circuitry incorporating advanced IC technology. Titration unit contains the magnetic stirring mechanism and the solenoid valve assembly. The cabinet is designed to serve as a titration stand. Karl Fischer method for determination of moisture content is used in pharmaceutical and drug manufacturing industries, food stuff, sugar, wood, paper and textile industries, petroleum refineries, chemical and fertilizer units etc.

Product Details:

SS Humidifier based on the rotating disc-splash plate principal. It produces only super fine particles of micron size, which are part of the atmosphere, thereby reaching every corner of the room, causing and resulting in uniform humidity in the room. Due to the upward thrust imparted to the micron sized water droplets, by high speed motorized unit, they remain suspended in the atmosphere for longer duration of time. The unit is capable of atomizing of water in an hour at full evaporation in the driest possible ambient conditions. The unit has body made up of S.S. A single unit is effective for an enclosed space of volume up to 40 cubic meters. The unit is provided with high speed 2800 RPM motor to run longer period, and the blades are aerodynamically balanced to ensure drop less fumigation.

Product Details:

Made of seasoned Teak wood with thick MDF sheet on top & bottom and MDF sheet on back. Thick non-rattling glass provided on two side and front slanting glass door. Front side slanting provided with openable glass door for convenient view of the specimens placed inside. Lower portion with round openings on front and one window on side. Inside painted white. Provided with one fluorescent tube and one Ultra Violet tube. Nicely polished.